Current Rebate Amounts

Eligible Residence Types

  • Existing Site Built Homes (up to 4-plex)
  • Existing Manufactured Homes

Minimum Installation Requirements

  • ONLY homes with existing forced air furnace qualify.
  • Existing heat pumps are NOT eligible for this rebate.
  • The New Heat Pump must have minimum ratings of 9.0 HSPF and 14 SEER.
  • Equipment must be tested and certified by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI); manufacturer claims of “equivalent to AHRI certified equipment” will not be accepted.
  • The New Heat Pump must be installed according to the current Performance Tested Comfort Systems (PTCS) standards by a PTCS Certified Installer.
  • Installations must be entered and accepted into the PTCS online site registry.
  • Air Source Heat Pumps are subject to quality assurance inspection by a BPA qualified inspector.
  • PTCS Commissions & Controls is a stand-alone measure and cannot be combined with this rebate.

Rebate Amount

Variable Speed: $1,600 *

Non-Variable Speed: $1,400

* Outdoor compressor must be variable speed or inverter-driven and must appear on BPA’s variable speed heat pump reference list.

Eligible Residence Types

  • Existing Site Built Homes (up to 4-plex)
  • New Construction Site Built Homes (up to 4-plex)
  • Existing Manufactured Homes

Air-Source Heat Pump Upgrade applies to the following situations:

  • Replacing existing Air-Source Heat Pump. Homes with existing Ground Source Heat Pumps are not eligible.
  • Installing ASHP in single-family new construction.
  • Installing ASHP in existing single-family or existing manufactured home without any previously existing primary heating system.
  • Adding a heat pump to a nonelectric heating system (e.g., gas, oil, propane, or wood).
  • Upgrading from zonal (including zonal hydronic systems that do not utilize a duct system for distribution) to ASHP.
  • Replacing a ductless mini-split heat pump.
  • Replacing a PTCS ASHP that is no longer functioning with a new PTCS-certified heat pump.

Minimum Installation Requirements

  • Available to homes with whole-home centrally ducted systems.
  • The New Heat Pump must have minimum ratings of 9.0 HSPF and 14 SEER.
  • Equipment must be tested and certified by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI); manufacturer claims of “equivalent to AHRI certified equipment” will not be accepted.
  • The New Heat Pump must be installed according to the current Performance Tested Comfort Systems (PTCS) standards by a PTCS Certified Installer.
  • Installations must be entered and accepted into the PTCS site registry.
  • PTCS Commissions & Controls is a stand-alone measure and cannot be combined with this rebate.
  • Air Source Heat Pumps are subject to quality assurance inspection by a BPA qualified inspector.

Rebate Amount

Variable Speed: $700 *

Non-Variable Speed: $500

* Outdoor compressor must be variable speed or inverter-driven and must appear on BPA’s variable speed heat pump reference list.

Eligible Residence Types

  • Existing Site Built Homes (up to 4-plex)
  • New Construction Site Built Homes (up to 4-plex)
  • Existing Manufactured Homes

Minimum Installation Requirements

  • Available to homes with whole-home centrally ducted systems.
  • Equipment must be tested and certified by the Air-Conditioning, Heating, and Refrigeration Institute (AHRI); manufacturer claims of “equivalent to AHRI certified equipment” will not be accepted.
  • The New Heat Pump must have HSPF and SEER ratings that meet the federal minimum standard.
  • This measure cannot be claimed in combination with any other Heat Pump measure.

Rebate Amount

$300

Eligible Residence Types

  • Existing Site Built Homes (up to 4-plex)
  • Existing Manufactured Homes

Minimum Installation Requirements

  • Available to homes with whole-home centrally ducted systems.
  • This measure can be claimed with either an existing centrally ducted electric forced air furnace or a heat pump.
  • Duct Seal must be installed according to current PTCS standards or BPA Prescriptive standards by a BPA certified installer.
  • Project must be entered and accepted in the PTCS registry.
  • This rebate is for existing heating ducts only. New ducts do not qualify.
  • This rebate can be claimed for both PTCS and non-PTCS installed heat pumps.
  • The Heat Pump is NOT required to be installed by a PTCS certified contractor to qualify for the PTCS or Prescriptive duct sealing rebate.

Rebate Amounts

$250 (Site Built Home)

$200 (Manufactured Home)

Rebate will not exceed 70% of installed job cost.

Form must be completed by contractor.

Rebate pre-approval is required prior to installation. Include specification sheets with application! Columbia River PUD Engineering must review specifications. After pre-approval, rebate funds will be reserved for six (6) months.

No incentive is available for existing or new ground source heat pumps.

For questions or to request a copy of this form, contact Efficiency Services Group: 888-883-9879rebates@esgroupllc.com.

Please allow 6 to 8 weeks after receipt of all required documentation for rebate checks to be issued and mailed.

Rebate Terms & Conditions