Residential Insulation Rebate

Amounts

Attic

- Existing insulation: R-30 or lower
- Final insulation: R-38 or higher
- Rebate: $0.75 per square foot

Floor

- Existing insulation: R-11 or lower
- Final insulation: R-19 or higher (or joist cavity filled) *
- Rebate: $0.75 per square foot

Walls

- Existing insulation: R-0 (no insulation)
- Final insulation: R-11 or higher
- Rebate: $0.75 per square foot

Attic

- Existing insulation: R-11 or lower
- Final insulation: R-19 or higher
- Rebate: $0.75 per square foot

Floor

- Existing insulation: R-11 or lower
- Final insulation: R-19 or higher (or joist cavity filled) *
- Rebate: $0.75 per square foot

Walls

- Existing insulation: R-0 (no insulation)
- Final insulation: R-11 or higher
- Rebate: $0.75 per square foot

Attic

- Existing insulation: R-11 or lower
- Final insulation: R-19 or higher
- Rebate: $0.75 per square foot

Walls

- Existing insulation: R-0 (no insulation)
- Final insulation: R-11 or higher
- Rebate: $0.75 per square foot

Attic/Roof

- Existing insulation: R-11 or lower
- Final insulation: R-22 or higher
- Rebate: $0.75 per square foot

Floor

- Existing insulation: R-11 or lower
- Final insulation: R-22 or higher
- Rebate: $0.75 per square foot

Rebate will not exceed 100% of the installed job cost. Rebate for self-installed energy-efficient upgrades will not exceed 100% of the cost of materials.

"*" indicates required fields

1Home Type

2Heat Source

3Existing Insulation Info

4Final Steps

SEE IF YOU QUALIFY

Residence Type*

Site Built Home (4 units or less)

Multi-Family Home (5 units or more)

Manufactured Home

New Construction

Unfortunately, New Construction insulation does not qualify for the rebate.

Multi-Family Type*

Low Rise (5 units or more, 3 stories or less)

Mid/High Rise (6 units or more, 4 stories or more)

Heat Source*

The residence must have an electric heating system capable of heating the entire dwelling to qualify.

Electric Forced-Air Furnace

Heat Pump

Ductless Heat Pump

Electric Baseboards

Electric Wall Units

Electric Portable Space Heaters

Ceiling Cable

Gas, Oil, Propane, or Other Non-Electric Heat Source

Other Electric Heat Source

Other Heat Source*

Unfortunately, your home must be heated with an electric heat source to qualify for the insulation rebate. If you have gas heating, please contact your gas provider to see rebates that may be available to you.

SEE IF YOU QUALIFY

In which area(s) of the home is insulation being added?*

Attic

Floor

Walls

In which area(s) of the home is insulation being added?*

Attic

Floor

In which area(s) of the home is insulation being added?*

Attic

Floor

Walls

In which area(s) of the home is insulation being added?*

Attic

Walls

Attic's Existing R-Value*

Please enter a number greater than or equal to 0.

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Attic's Existing R-Value*

Please enter a number greater than or equal to 0.

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Attic's Existing R-Value*

Please enter a number greater than or equal to 0.

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Attic's Existing R-Value*

Please enter a number greater than or equal to 0.

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Unfortunately, your attic's existing insulation level must be R-19 or below to qualify for the rebate.

Unfortunately, your attic's existing insulation level must be R-11 or below to qualify for the rebate.

Floor's Existing R-Value*

Please enter a number greater than or equal to 0.

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Which of these apply?

Crawlspace

Basement (heated)

Basement (unheated)

Unfortunately a heated basement is ineligible for the insulation rebate program, as additional floor insulation would not result in any energy savings.

Unfortunately, your floor's existing insulation levels must be R-11 or below to qualify for the rebate.

Are the walls currently insulated?*

Yes

Unfortunately, your walls must have no existing insulation (R-0) to qualify for the rebate.

CONGRATULATIONS!

Based on the information that you provided, your home is eligible for the insulation rebate. This information will be verified on your documentation. All energy-efficient upgrades must be installed according to Bonneville Power Administration (BPA) specifications. Please complete the rest of this form to apply.

Pre-approval of your project is strongly recommended. Pre-approval ensures that your project meets program requirements and ensures that rebate funds will be reserved for six (6) months.

There is no guarantee that funds will be available after the six-month approval or that the incentive amount will remain the same.

Rebates are available on a first-come, first-served basis and are subject to the availability of funds.

Attic Insulation

Final R-Value*

If work has not yet been completed, please insert the proposed final R-Value

Total Area of New Attic Insulation (Sq Ft)*

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Installation Method*

Contractor-Installed

Self-Installed

Floor Insulation

Final R-Value*

If work has not yet been completed, please insert the proposed final R-Value

Total Area of New Floor Insulation (Sq Ft)*

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Installation Method*

Contractor-Installed

Self-Installed

Wall Insulation

Final R-Value*

If work has not yet been completed, please insert the proposed final R-Value

Total Area of New Wall Insulation (Sq Ft)*

This must be verified before your rebate can be processed. Please refer to the documentation requirements in this form for more details.

Installation Method*

Contractor-Installed

Self-Installed

REQUIRED DOCUMENTS

If possible, please upload any required documents for the insulation rebate with your application. Additional documents may be e-mailed to rebates@esgroupllc.com.

For insulation installed by a contractor, required documents include:

Copies of contractor final invoice(s) noting:
- R-value of final insulation
- The square footage of added insulation
- The total cost of labor and materials
- The invoice date
Proof of existing insulation levels. This may either be documented on the contractor's invoice or by providing clear pictures of the insulation clearly showing its depth with a ruler. If you are eligible and unable to provide this documentation, we may provide a free on-site audit that must be performed before the new insulation is installed. Please contact us at (888) 883-9879 or rebates@esgroupllc.com to determine eligibility and scheduling for your audit.
Clear pictures of the new insulation clearly showing its depth with a ruler. If you are eligible and unable to provide pictures, we may provide a free on-site inspection after we have received all other required documentation. Please contact us at (888) 883-9879 or rebates@esgroupllc.com to determine eligibility and scheduling for your inspection.

For insulation installed by the homeowner or a non-contractor acquaintance, required documents include:

Copies of purchase receipt(s) noting:
- R-value of added insulation
- The square footage of added insulation
- The total cost of materials
- The receipt date
Proof of existing insulation levels. This may be documented by providing clear pictures of the insulation clearly showing its depth with a ruler. If you are eligible and unable to provide pictures, we may provide a free on-site audit that must be performed before the new insulation is installed. Please contact us at (888) 883-9879 or rebates@esgroupllc.com to determine eligibility and scheduling for your audit.
Clear pictures of the new insulation clearly showing its depth with a ruler. If you are unable to provide pictures, we will provide a free on-site inspection after we have received all other required documentation. Please contact us at (888) 883-9879 or rebates@esgroupllc.com to determine eligibility and scheduling for your inspection.

Insulation File Upload

Drop files here or

Max. file size: 20 MB.

APPLICANT INFORMATION

Account Number

Are you the account holder?*

Yes

Relationship to the Account Holder*

Family Member

Landlord

Tenant

Other

Name*

First Last

Phone*

Email*

Enter Email Confirm Email

Installation Address*

Street Address City State ZIP Code

Do you have a different mailing address?*

Yes

Mailing Address*

Street Address City State ZIP Code

Application Notes

Please insert any notes that you would like us to review with your application. (This is not required to submit the application.)

SUBMIT YOUR APPLICATION

Applicant Release*

By submitting this form, the applicant acknowledges that they have read and agree to the Terms & Conditions found at the bottom of this page.

I Agree to the Terms & Conditions

Please allow 8 to 10 weeks after final inspection approval and receipt of all required documentation for rebate checks to be issued and mailed.

Rebate Terms & Conditions

Residential Insulation Rebate

Site Built Homes (4 units or less)

Attic

Floor

Walls

Multi-Family, Low-Rise Homes (5 units or more, 3 stories or less)

Attic

Floor

Walls

Multi-Family, Mid/High-Rise Homes (6 units or more, 4 stories or more)

Attic

Walls

Manufactured Homes

Attic/Roof

Floor

SEE IF YOU QUALIFY

SEE IF YOU QUALIFY

CONGRATULATIONS!

Attic Insulation

Floor Insulation

Wall Insulation

REQUIRED DOCUMENTS

APPLICANT INFORMATION

SUBMIT YOUR APPLICATION