Ukiah Air Sealing Rebate

1Home Information

2Air Sealing Test Information

3Submit Application

This rebate measure requires Blower Door Pre-Testing and Post-Testing.

Air Changes per Hour (ACH) represents the amount of air leakage.

Testing and Sealing must meet the following minimum requirements:

Equipment and gauges must be maintained and calibrated according to manufacturers' recommendations. Technicians may be required to show evidence of required maintenance or calibration procedures.
House leakage must be tested and reported in CFM, at a house pressure of 50 Pa with respect to outdoors. If the house cannot be pressurized to 50 Pa, a lower pressure may be used and multiplied by a "can't reach 50” factor supplied by the equipment manufacturer. The “can’t reach 50” multiplier must be shown on this form.
Test procedures must be conducted by a certified HERS Rater, or BPI Technician, or as approved by the utility.
Testing and sealing must be performed in accordance with HERS, or BPI standards. Mechanical ventilation may be required.

Home Type*

Single-Family Home (Site-Built)

Multi-Family Home (2 or more units)

Manufactured Home

Floating Home

New Construction (built within past 12 months)

New construction homes and installations required by Title 24 codes and standards are not eligible for rebates.

Home's Square Footage*

Ceiling Height (in feet)*

Building Volume (cu. ft.)*

Number of Levels*

Are any Combustion Appliances present inside the home?*

Yes

Your project is not eligible for the rebate. Thank you for your interest.

Is a UL-Listed CO Detector installed inside the home?*

Yes

N/A

Your project is not eligible for the rebate. Thank you for your interest.

Blower door test data must be entered before and after air sealing to show a 30% or greater reduction in air leakage.

Pre-Test

House Pressure (Pa)*

Fan Configuration (Rings or other restrictors)*

Fan Pressure*

Can't Reach 50 Factor

Leave blank if not applicable

House Leakage Rate*

Post-Test

House Pressure (Pa)*

Fan Configuration (Rings or other restrictors)*

Fan Pressure*

Can't Reach 50 Factor

Leave blank if not applicable

House Leakage Rate*

Leakage Reduction in CFM50*

Calculate: Pre-test - Post-test

% Reduction*

Calculate: Leakage Reduction / Pre-test x 100

CFM Reduction must be 30% or greater to qualify for this rebate. Thank you for your interest.

List in detail which air sealing measures were installed*

(e.g., sealed bypasses, plumbing/electrical penetrations in wall, attic, floor, etc.)

Date of Blower Door Post-Test*

Contractor's Certification Number*

Certification Type*

HERS

BPI

Please provide any final invoices/receipts and certificates with your application. Screen captures may not be accepted.

Upload Document(s)*

Drop files here or

Max. file size: 20 MB.

Installation Address*

Street Address City State ZIP Code

Applicant Name*

First Last

Are you the utility account holder?*

Yes

Utility Account Number (if known)

What is your relationship to the account holder?*

Family

Tenant or Resident

Homeowner

Landlord or Property Manager

Other

What is the account holder's name? (optional)

Your Email*

Enter Email Confirm Email

Your Phone*

Do you use a different postal mail address?*

Yes

Mailing Address*

Street Address City State ZIP Code

SUBMIT YOUR APPLICATION

Notes

Include notes you would like on the application, or leave this box blank.

Applicant Release*

I have read and understand this application, including the Terms and Conditions linked at the end of this form.

I certify that the information I have provided in this application is true and correct.

Rebate: $25 per home

Pre-Test

Post-Test

SUBMIT YOUR APPLICATION